Hi. Netware 6.5 SP1A server running Arcserve 9.01 and CANWPABD (NOT NWASPI) and getting these errors. I have 1.5GB of RAM in the server (as reported at the system console by typing "memory").
Should I do any/all of the following to fix this problem???
1. Add "SET RESERVED BUFFERS BELOW 16MEG=300" to startup.ncf
2. Set "Minimum cache buffers required to start jobs" to less than 10%(current value) in the Arcserve Scheduler > Configure BrightStor Arcserve Server
3. Change BTI.cfg value of CacheSize=32768 to a lower value
Other suggestions??????
Thanks very much in advance.
Should I do any/all of the following to fix this problem???
1. Add "SET RESERVED BUFFERS BELOW 16MEG=300" to startup.ncf
2. Set "Minimum cache buffers required to start jobs" to less than 10%(current value) in the Arcserve Scheduler > Configure BrightStor Arcserve Server
3. Change BTI.cfg value of CacheSize=32768 to a lower value
Other suggestions??????
Thanks very much in advance.