Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Rhinorhino on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Arcserve 2000
- Thread starter SilviaS
- Start date
Not if you are using a single tape drive. If you are using a library or changer, then you can load up the device with the tapes you want to format and use the chgtest command-
e.g
chgtest changer:[changer id] erase/format startslot:[startslot no] endslot:[endslot no]
SjrH - Data Security Storage & Availability Specialist
e.g
chgtest changer:[changer id] erase/format startslot:[startslot no] endslot:[endslot no]
SjrH - Data Security Storage & Availability Specialist
- Thread starter
- #3
davidmichel
Technical User
chgtest is for a library, tapetest for a stand alone drive.
- Status