Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations gmmastros on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Any way to find out busy extentions? 1

Status
Not open for further replies.

delphilord

Programmer
Nov 10, 2003
53
IR
Hi all members
I really need a way to get all busy extension on realt time on 308 boxes.
I think it is impossible doing it by RS-232 port.but It is better I ask you too.
is it possible to find all busy extensions (not co line) at real time even using cards or any hardwares?
Thank and Best regards
 
Do you mean a visual indication of which extensions are busy at any given time ?
If so, then a DSS console attached to the operators phone will show a red lamp if the extn is busy.

If this is not what you need could you explain a bit more on what it is you need to do
 
No,As you said I dont want visual indication.
I want This info on PC RS232 port.
I konw SMDR port does not send this info.But may be some a circut or Card can do it.
may be I must design some think like DSS console just for knowing busy ext
is it possible?
 
I know of Software that will do this for the TDA series but have not seen any for the 308.

Sorry
 
dear trostki.coyld you pls inform me about this software?
do you know how it works?may if I monitor com Port when running this software I can i do it in my own application.
thanks
 
all tapi info for the tda range comes off the usb
doubt that software will help
 
Dear cwc3.
would you please explain more?how can I read this info with my own software?
what about kxtd series? what about boxes without usb port like 308 616 824?

any refrence?

Thanks and best regards
 
if you are talking about the kx-t 308 616 kx-ta 6/824
you're out of luck and if it was a kx-td 308 i don't think
it supported tapi.
 
Thanks
I understan it this way( am I right?)
For TDA seies, USB port will send tapi info.I must read data from USB port.
I can do some change in my program for reading from usb port.
But this info like?are they TEXT and raw ascii?or I must use TAPI commands to get info?

Thank you
 
I can't understand.
you wrote
"all tapi info for the tda range comes off the usb
doubt that software will help"

and "you can't do anything."

I am talking about TDA series and USB.I can not get info anyway?even for this boxes?


 
you are type so cryptic that know one knows what you talking about.the td 308 just does not suport tapi thru the db-9
 
why don't you download the tapi tsp sdk documents
and start reading....
 
The TD816/1232/500 all supported TAPI via the RS232, I have no information to suggest the 308 ever did.



Pat MacKinnon
Omni telecommunications Inc.,
London, Ontario, Canada
e: [ pat & omnitel , ca ]
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top