Any DIMM Experts that can help identify a Trunk Status Message?

[its_the_butcherman]

Customer has a PRI that for some reason only eight channels are working out of the 23. When I run the command "status trk 00 17" I get the following output:
* PORT STATUS (0 --> 0)*
PORT (PHYS) STATUS CALL HOLD CONDITION
--------h(--------h) : (----h) --------h --------h no trunk port is assigned
00340001h(00010004h) : SPEAK( 11h) 00000381h 00000000h
00340002h(00020004h) : IDLE( 0h) 00000000h 00000000h
00340003h(00030004h) : IDLE( 0h) 00000000h 00000000h
00340004h(00040004h) : SPEAK( 11h) 00040052h 00000000h
00340005h(00050004h) : IDLE( 0h) 00000000h 00000000h
00340006h(00060004h) : IDLE( 0h) 00000000h 00000000h
00340007h(00070004h) : -----( 32ch) 00000000h 00000000h
00340008h(00080004h) : -----( 32ch) 00000000h 00000000h
00340009h(00090004h) : -----( 32ch) 00000000h 00000000h
0034000Ah(000A0004h) : -----( 32ch) 00000000h 00000000h
0034000Bh(000C0004h) : -----( 32ch) 00000000h 00000000h
0034000Ch(000D0004h) : -----( 32ch) 00000000h 00000000h
0034000Dh(000E0004h) : -----( 32ch) 00000000h 00000000h
0034000Eh(000F0004h) : -----( 32ch) 00000000h 00000000h
0034000Fh(00100004h) : -----( 32ch) 00000000h 00000000h
00340010h(00110004h) : -----( 32ch) 00000000h 00000000h
00340011h(00120004h) : -----( 32ch) 00000000h 00000000h
00340012h(00130004h) : -----( 32ch) 00000000h 00000000h
00340013h(00140004h) : -----( 32ch) 00000000h 00000000h
00340014h(00150004h) : -----( 32ch) 00000000h 00000000h
00340015h(00160004h) : -----( 32ch) 00000000h 00000000h
00340016h(00170004h) : SPEAK( 11h) 00040195h 00000000h
00340017h(00180004h) : IDLE( 0h) 00000000h 00000000h

Can anyone tell me, what does the 32ch mean? Normally I see the channels as IDLE but I'm not sure where to look. I've gone over all of my programming and verified it is all correct.

 

[CoralTech]

What system?

 

[its_the_butcherman]

I guess that would be useful information. lol, sorry.

SV9100 - CP20 - v14.10.50