Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations wOOdy-Soft on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

another xp install question

Status
Not open for further replies.

defreib

IS-IT--Management
Oct 15, 2003
138
US
I have loaded XP on 2 desktops at home and both times the pc did not recognize an ethernet card or sound card. I am doing a complete reload and deleting all on the hard drive. Anyone have any idea why these device are not recognized?

Thanks
 
Probably because Windows doesn't have drivers for them. Go to the manufacturer's website, and download the drivers for them Then Once Windows is done installing, you can install the drivers for them.

----------------------------------
Ignorance is not necessarily Bliss, case in point:
Unknown has caused an Unknown Error on Unknown and must be shutdown to prevent damage to Unknown.
 
Thanks vacunita,

I found what I think is the correct driver and extracted it to the hard drive but I have NO idea how to apply it so the pc recognizes it. Any pointers would be much appreciated.

Thanks
 
If you go into device manager, you should have a list of hardware installed on your machine. Some of them might have an exclamation or question mark, choose from those, right click on them and click on update driver.

Thne point the wizard to wherever you extracted the drivers to.

Alternatively some drivers run an executable that will ask you to re-start your machine, upon restarting the device should be picked up, and installed correctly.

----------------------------------
Ignorance is not necessarily Bliss, case in point:
Unknown has caused an Unknown Error on Unknown and must be shutdown to prevent damage to Unknown.
 
JFYI - the other reason why XP would not recognize a piece of hardware, would be that that piece is defective...


Ben

"If it works don't fix it! If it doesn't use a sledgehammer..."
 
Got it, thanks to all. Learned quite a bit the last few weeks in this forum.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top