Analog Terminal Adapter for M2616 sets

[telsan]

Hi All!

Can anyone tell me the part numbes(s) for an analog terminal adapter for the M2000 series telephones? Also, do I need a power supply for it (if so, please let me know the part number), and...how do I program one (if you can send a printout of one that is programmed I would really appreciate it).

Thanks!

 

[telsan]

Anyone?

 

[johnpoole]

http://www.usedsystems.co.uk/stocklist,030300.html

ATA-2 inc PSU NT8B90AM-93, that should get you what you need, the ps comes with that part number, and it does plug in to local power. you can wire around that if you want to install a ps remote.. line limit past the ata is around 100 ft and works two way, rotary or dtmf.. this picks up key 0 on the set (right, why not key 8) but i usually put a non did on key 0, moving the main number to another line..


john poole
bellsouth business
columbia,sc

 

[telsan]

Thanks John!

 

[telsan]

johnpoole,

Will the NT8B90AL-93 work for ATA on the M2616 set? You advised me that the NT8B90AM-93 is the correct part, but I have 2 AL-93's...

 

[johnpoole]

i don't have any al's to answer your question, the posted web site may be a better source for that info. i would recogmend testing it on a 16. when i have any new or untested feature or hardware to work on, i install it in the switchroom. give it a decent test before trying to make it work at someones work area. then if it doesn't work, only i know how wronge i was

john poole
bellsouth business
columbia,sc

 

[telsan]

Good Advice...Thank You!