ANALOG PORTS ON OPT 11C MINI DO NOT WORK

[scanjet]

All programing looks good my analog ports show idle when doing a stat in ld 32 cls has dtn.The switch has two cab
my call pilot is also going up and down.the system was installed in 2000 and has never had a ups on it so my thinking is I have corruption and power issues if any one has any ideas for repair please let me know

 

[worldwidedialtone]

Check your that your grounds are still good. Check that your DTRs and XTDs are correct on cabinet 0.

MIKE

 

[scanjet]

Thanks for the input but I checked and all of the connections are good

 

[NortelSE]

Do you have any logs ?

I would replace the SSC / MSC as a first step as all the peripheral signalling control ( bus control ) is housed on the card.

Please provide analog programming info for assistance.