Analog phone not entering PIN to access VMPro 1

[fonedude]

Is there a way on analog phones not to have to enter the PIN to access VM? We have a large implementation at a assisted living facility and we want the residents not to have to enter a PIN to access VM in their rooms. I have a 10.1 IPO SE.

 

[intrigrant]

Shortcode *99
TN "?"EDE#
Action = Voicemail Collect
Line ID = 0

Pincode equals extension number or replace E with a generic VM Code like "?"ED0957854#
If the D does not work then try a Y or a ,(comma)

 

[fonedude]

I'm a little confused. Can you elaborate a little more?

 

[intrigrant]

First read the docs on shortcodes and figure it out, that is the best way to understand what you are doing.

It is easy to learn a trick but i is better to learn how the trick actually works.

 

[Pepp77]

Can't you just use source codes?

| ACSS SME |

 

[intrigrant]

Not on Intiuty mode

 

[Ekster]

In Intuity mode if you add a "Get Mail" action with specific set to "Callers Mailbox" to the default collect start point you will not need to enter the mailbox number. If the source number is set correctly no PIN is required either.

“Some humans would do anything to see if it was possible to do it. If you put a large switch in some cave somewhere, with a sign on it saying 'End-of-the-World Switch. PLEASE DO NOT TOUCH', the paint wouldn't even have time to dry.”

Terry Pratchet

 

[Pepp77]

Ekster - that may be why it always works for me, I always set a default leave and collect start point on every voicemail pro I configure.

| ACSS SME |