I have a large phone network, mixed IP and TDM, at the core are dual 8700s running CM5. Also have a large number of G350s at remote offices.
I also have a very small remote office, with 5 phones that are currently using a Merlin Legend. I want to remove the legend and save the cost of the maintenance payments. I have good IP bandwidth to the site so i thought about just dropping 5 IP phones in the site and pulling the legend.
The problem is they have 3 analog devices, 2 fax machines and a credit card machine. I don't want to put in a Gateway for this small of an office. I also don't want to pay for three outside phone lines for the three devices. Is there any kind of converter or adapter that will connect to my IP ethernet and let me attach an analog device and define it in my system as a 2500 type phone?
Thanks in advance for any help.
Steve
I also have a very small remote office, with 5 phones that are currently using a Merlin Legend. I want to remove the legend and save the cost of the maintenance payments. I have good IP bandwidth to the site so i thought about just dropping 5 IP phones in the site and pulling the legend.
The problem is they have 3 analog devices, 2 fax machines and a credit card machine. I don't want to put in a Gateway for this small of an office. I also don't want to pay for three outside phone lines for the three devices. Is there any kind of converter or adapter that will connect to my IP ethernet and let me attach an analog device and define it in my system as a 2500 type phone?
Thanks in advance for any help.
Steve