Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Chriss Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Analog/digital station count-G3r11
- Thread starter grayml
- Start date
mikeydidit
IS-IT--Management
It's not going to be easy no matter how you do it. You could run an export for 2500-2554-modem-fax and get a good count on your analog sets. Then you would have to cover (and it might be easier) to list this same data for whatever types of digital sets your running. Then compare this with what's on the "disp cap" and see how close you get.
You can also run this. "list set type 2500 (or whatever you want here)" to pull them up.
When is the last time you helped someone, just because you were able to?
For the best response to a question, read faq690-6594
You can also run this. "list set type 2500 (or whatever you want here)" to pull them up.
When is the last time you helped someone, just because you were able to?
For the best response to a question, read faq690-6594
danparrish
MIS
when you do list station type 2500 etc...
just page down to the last page without counting them, I believe that ASA will display 7 stations on each page, so 7 x number of pages = X
just page down to the last page without counting them, I believe that ASA will display 7 stations on each page, so 7 x number of pages = X
- Status