juandebobo
MIS
I am trying to use 3 copper DNIS lines with the IPO403 and IPO 16 port analog module. It's not working. Any thoughts?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations bkrike on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Analog DID DNIS
- Thread starter juandebobo
- Start date
- Status
We use the Multi-tech boxes. They work okay, not as clear as a T1 line. In about a week we will no longer need our's and would be happy to sell them (we have a new T1 going in which can support DID's). The DID units we have are:
Multi-Tech CallFinder™ Call Router
Model CF220 - Version 1.03
Originally they cost about $600 each and were bought 1/2005. We have two of them and each one can have two DID trunks. Make an offer.
For additional info from Multi-tech:
TEL: (763) 785-3500 or (800) 328-9717
FAX: (763) 785-9874
Tech Support: (800) 972-2439
Web Site: FTP Site: ftp.multitech.com
Multi-Tech CallFinder™ Call Router
Model CF220 - Version 1.03
Originally they cost about $600 each and were bought 1/2005. We have two of them and each one can have two DID trunks. Make an offer.
For additional info from Multi-tech:
TEL: (763) 785-3500 or (800) 328-9717
FAX: (763) 785-9874
Tech Support: (800) 972-2439
Web Site: FTP Site: ftp.multitech.com
- Status