Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations wOOdy-Soft on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
alarm and event codes 1
- Thread starter jmilla
- Start date
-
1
- #2
This is what I have for 904...
904: qERR_In_tLD P3 'B' Trace TestLog
904: | CAUSE:
904: | A logevent has been caused in the ISDN loop driver or broadcast
904: | call handler by the receipt of unexpected input.
904: | 1st parameter is an error sub-code (see source code).
904: | Remaining bytes are optional parameters passed to the error call.
904: | See the source code at the location of the error. call.
904: | ENVIRONMENT:904: | ISDN loop driver or broadcast call control receiving input.
904: | HUMAN ACTION:
904: | Determine input that caused event and state of the ISDN
904: | driver when the call occured. Take steps to fix
904: | incorrect event or have driver accept it.
904: qERR_In_tLD P3 'B' Trace TestLog
904: | CAUSE:
904: | A logevent has been caused in the ISDN loop driver or broadcast
904: | call handler by the receipt of unexpected input.
904: | 1st parameter is an error sub-code (see source code).
904: | Remaining bytes are optional parameters passed to the error call.
904: | See the source code at the location of the error. call.
904: | ENVIRONMENT:904: | ISDN loop driver or broadcast call control receiving input.
904: | HUMAN ACTION:
904: | Determine input that caused event and state of the ISDN
904: | driver when the call occured. Take steps to fix
904: | incorrect event or have driver accept it.
- Status
Similar threads
- Locked
- Question