Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Chriss Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
AIX-Anyone know how to load a tape cartridge with a shell script com
- Thread starter ronfarris
- Start date
- Thread starter
- #3
Hi Arsi:
Yes i tried tctl, however there is not a command to load the tape, just rewoff1 and offline to unload it.
tctl -f /dev/rmt* offline or rewoff1.
Do you know of any other command that might load the tape?
I can get them to load by using serial commands if I connect a serial cable to the tapedrives serial port from a PC, however, I cannot figure out how to load them automatically.
Yes i tried tctl, however there is not a command to load the tape, just rewoff1 and offline to unload it.
tctl -f /dev/rmt* offline or rewoff1.
Do you know of any other command that might load the tape?
I can get them to load by using serial commands if I connect a serial cable to the tapedrives serial port from a PC, however, I cannot figure out how to load them automatically.
- Status
Similar threads
- Locked
- Question