AGAIN ALL WORK AREAS IN USE 2

[MEGUIA]

HI

I HAVE WINDOWS 2000, FOXPRO VER 2.6 DOS.

DEBUGGING THE PROGRAM I NOTICE THAT I ONLY HAVE 25 WORK AREA
AVAILABLE. I CHANGE THE CONFIG.NT FILES = 200, CREATE A CONFIG.FP WITH THE INFORMATION I GATTHER IN THE FORUM AND THE PROBLEM PERSISTS. VERIFY IN OTHER COMPUTER WITH WINDOWS NT AND THE APPLICATION WORKS FINE. WHEN THE 25 WORK AREAS GET FILLED IT START IN 0 AND DISPLAY THE ERROR ROUTINE.

WINDOWS 2000 DON'T RECOGNIZE THE 200 WORK AREAS AVAILABLE IN DOS ENVIRONMENT CONFIGURATION.

PLEASE HELP.

THANK YOU

 

[rgbean]

If you ONLY have 25 work areas, then you must be running the Standard version of FPD. Consider running the Extended version - it has up to 225 work areas. It should be just a matter of providing the proper runtimes (Foxdx260.esl, rather than Foxd2600.esl and Foxd2600.eso), and making sure the PIF / LNK has access to an extendend memory manager.

Back in the "old" days, we managed to write some pretty sophisticated (albeit slow) applications in dBase II with just 2 (two) work areas.

Rick

 

[zimbaliza]

in your shortcut or whatever you fire fox up with

make sure you have a +X (to put it in Extended fox)

i.e.

FOX +X

or

FOXR +X NEWAPP.APP

Hope it helps

Zim