Advice on AN error log

[977128]

Hi,

This is an error log from an AN router:

"Could not obtain files over network, will attempt local boot.
Configuration file '1:config' successfully loaded
BOOTSTRAP FAILURE: error obtaining boot files
Entering diagnostic monitor...
AN Diagnostics: Version - 7.34 - Tue Aug 25 16:26:10 EDT 1998

MOD ID = 0x413 (1043) Rev = 0x0B (11) S/N = 520346
Flash Card installed Memory = 16MB

TYPE "?" or "h" for HELP

AN_DIAG>> dir
Volume is not Partitioned
Volume = 1:

File Name Size Date Day Time
---------------------------------------------------------
an.exe 2771435 03/16/98 Mon. 16:43:42
ti.cfg 132 03/16/98 Mon. 16:43:42
install.bat 205348 03/16/98 Mon. 16:43:42
debug.al 12372 03/16/98 Mon. 16:43:42
test_br 2960 10/15/98 Thu. 04:52:35
langkawi 3136 12/14/98 Mon. 01:40:55
isdn.bat 37948 04/01/99 Thu. 00:25:02
isdnbri.bat 37024 04/01/99 Thu. 00:25:20
show.bat 14063 04/01/99 Thu. 00:25:36
digit7.cfg 4364 07/23/99 Fri. 06:15:30
langkawi.cfg 4364 11/18/99 Thu. 02:43:11
config 4364 11/18/99 Thu. 02:43:26

8388608 bytes - Total size
5290656 bytes - Available free space
5290656 bytes - Contiguous free space

AN_DIAG>>"

Need help on what can I do with this error, as for the time being I am only planning to copy the config file and move it to a temp flash card.

Thanks

 

[drenaker]

This router may be going to the network to get its image for boot. If you want it to boot locally, the files exist on the flash, try.

bconfig image local

Usage:
bconfig <image | config> <local | network> [<IP address> <pathname>]
bconfig -d <image | config>