Adding trunks to a trunk group

[Phoneman2]

I have a Isdn-pri with 23 trunks setup for are dialer. I need to add 10 more trunks to that group from another PRI. Would I just add the new port adresses to the first trunk group? If I do that do I have to remove the 10 trunks from where I got them, or can they be in two places? Look!!! New Buttons
Same amount of time!

Thanks All Phoneman2

 

[ken07734]

as long as you have a signalling group set up for the pri itself, you can mix and match, sort of?, if you have the same service on the pri t's than you can place two seperate t1's into the same trunk group. I've done it numerous times without problems. You can also set them up as cbc and then manipulate the channels anyway you want.

 

[jimmypad]

However as the switch will remind when you try to enter it,you can't have the same b-channel in two different trunk group.