I have added a new Trunk Grp 5 and the signaling Grp 11. I know that my D channel is on the 4th curcuit. I want to be able to test outside dialing from my ext - 79100. What do I need to change to make this possible to dialout of this trunk grp? Do I need to change the "ARS ANALYSIS"? This is the part that I'm stuck on.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Wanet Telecoms Ltd on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Adding new Trunk Grp & need a little help
- Thread starter allen049
- Start date
you need to add an entry that matches the number your dialing in ars "cha ars ana XXXXXXX loc X"
Then you need to edit the route used in that ars entry "change route X" (Might have to add route if it doesnt already exist).
Then in the route you specify the trunk.
Then you need to edit the route used in that ars entry "change route X" (Might have to add route if it doesnt already exist).
Then in the route you specify the trunk.
- Status
Similar threads
- Question