Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TouchToneTommy on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Adding ATM to MICS

Status
Not open for further replies.
maxse

maxse

Technical User
Dec 2, 2011
272
US
I am trying to add an analog trunk module to my 6.1 MICS. I have the fiber card in slot 2 and 2 ds trunk cards in slots 1 and 2 of the module and I get a not in service on the lines 61,62,etc. any suggestions?
 
Sort by date Sort by votes
I have a 2 port expansion card and I was plugged into the bottom so I will change to the top, what would my target lines start at?
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

P
  • Locked
  • Question
Incoming calls go to dial tone on Nortel MICS-XC 7.0
Replies
11
Views
1K
curlycord
curlycord
Don W
  • Locked
  • Question
Mics software upgrade tools
Replies
9
Views
770
curlycord
curlycord
jsaad
  • Locked
  • Question
MICS GATC going dead 4
2
Replies
24
Views
1K
curlycord
curlycord
RedMaligator
  • Locked
  • Question
Nortel MICS connected to Call Pilot
Replies
10
Views
775
curlycord
curlycord
Michael OConnor
  • Locked
  • Question
Norstar MICS Extension Call Forward External 4
Replies
12
Views
910
ttEstiNg2023
ttEstiNg2023

Part and Inventory Search

Sponsor

Back
Top