Adding another ISDN Vid conf line 1

[Plantman2000]

Hi all,

Please could someone shed some light on this for me?

We currently have 4 idsn lines on our op61 and I'd like to add another 1 or 2.

I presume the procedure is to go into LD 27 and add a new BRI thus:-

TN 28 0 15 5
DES ISDN
CUST 0
CTYP SILC
OPT BRIL
MISP 18
MODE NTAS
B1CT VCE DTA
B2CT VCE DTA
LDN NO
XLST 0
MTEI 8
MCAL 4
MTSP 8
LAPD 0
PRID 2
PDCA 2
FDN 7994
EFD 7994
HUNT 7994
EHT 7994
TGAR 1
NCOS 6
SCPW 1111
SGRP 0
CAC_MFC 0
CLS TLD ICDD CDMD MRD UDI ABDD PGND

then add this as a DN somehow under LD 20?

I've attempted this as a new of BRI but I get SCH'd.
This is where I am stuck.

Many thanks for any help.

 

[marc3lo]

Hello Plantman2000, here is what you have to do.
First add the new DSL circuits in LD 27 as in your example.
Then still in LD27 add the TSP were the DN for the circuit is add, here is an example., The DSL value that will ask you it will be the ones you add.


REQ prt
TYPE tsp
DSL 36 0 13 7
OPT


USID 0
MPHC NO
SUPL_SVC
DN 7923 0
CT VCE DTA
MCAL 4
CLIP YES
PRES YES
COLP NO
TRANS NO
FEAT HTA FNA SFD CFTA MWD FBA HBTD CFXA DNO3 DNDY
SSRV_ETSI

DFDN 7923

 

[Plantman2000]

marc3lo - Thank you very much! That has it sorted

Much appreciated for your speedy answer!

 

[Plantman2000]

In addition, we have this as a STAT of our SILC

SW DSL L2 #TEI L1 D-CHANNEL RCVY CLK MODE
==== ==== ==== ==== ==== ========= ==== ==== ====
00 = IDLE LINE RLS 0 UP
01 = IDLE LINE RLS 0 UP
02 = IDLE LINE RLS 0 UP
03 = UNEQ
04 = IDLE LINE RLS 0 UP
05 = IDLE LINE RLS 0 UP
06 = IDLE LINE RLS 0 DOWN
07 = UNEQ

How can I get the unequipped ones sorted ?

Many thanks.

 

[Plantman2000]

Duh ignore that....obv 'unequipped' cos they are not in use...and they are not in use cos for some reason they go straight to a 'down' state.

Thats the issue with the 'unequipped' ones.....