Adding an MM711 to a G430

[CaptObvious26]

Pardon me for asking what might be a simple and stupid question, but when adding a card to the system is there any software provisions that must be made first? I'm hoping it's as simple as powering down the G430, adding the MM711 Card and powering the G430 back up. We're adding a Zone Paging Module on the otherside of the highway and the G430 doesn't have an MM711 in it currently.

 

[JayNEC]

You don't even need to power down. Just plug it in, and it should show up in a list config.

New England Communications

http://www.necomm.com

 

[CaptObvious26]

so they are hot swappable?

 

[wpetilli]

yes

 

[dialtonebone]

CaptObvious -- just so you know, all the G650 and G4x0 cards can be hot swapped without damage to the chassis.