Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Chriss Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Adding A New SBC PRI on Opt81c
- Thread starter rookie10
- Start date
superiortel
IS-IT--Management
LD 15
Net_data set isdn to yes
ld 17
CEQU 1 (loop) 23 esf
b8s
fdl
ld 17
ADAN dch 3
(ni2, d100, d250, etc.)
ld 16
create route rdb new route did
ld 14
create trunks new 23 did
ld 96
enl tmdi 1 (loop)
enl dch 3
ld 60
enll 1 (loop 1)
Net_data set isdn to yes
ld 17
CEQU 1 (loop) 23 esf
b8s
fdl
ld 17
ADAN dch 3
(ni2, d100, d250, etc.)
ld 16
create route rdb new route did
ld 14
create trunks new 23 did
ld 96
enl tmdi 1 (loop)
enl dch 3
ld 60
enll 1 (loop 1)
What type of switch? What type of SBC swith are you tying to? It can be pgrmed as 2 way DID or CBCT with two service routes. Alot of questions must be answered by SBC to know how to prgrm it. The above answer is ok for an 11C but a little different for the bigger switches. Go to the NTPs for more
- Status
Similar threads
- Locked
- Question