Adding a new Port Network 1

[telcomwork]

Hello again. I was wondering if some of you more experianced designers, installers could lend me a hand.

I need to add an additional port network on a system with S8710s, and 4 G650s running CM 3.0.1. I included an my current config below

1. I was wondering if I could move my 2 IPSI's out of 01b to the new port network to save some cost because in 01B there is no MedPro for my IP resources (CSCM, AES,..)so it's redundancy is not really there since it has no MedPro and uses the MedPro in 01A.


2. In my new port network I'll load balance the cards and add two power supplies, MedPro and possibly use the 2 IPSI from 01B.

3. The AES servers have two CLANS each. Would I create any talk path problems or data flow if I place one CLAN in Port Network 1 and the other CLAN in Port Netork 2 for redundancy should a PN die?

4. I'll load balance the DS1, Digital adn Analog circuit packs but what are some other good best practices?

Current Config:
Board Assigned Ports
Number Board Type Code Vintage u=unassigned t=tti p=psa

01A00 POWER SUPPLY 655A
01A01 IP SERVER INTFC TN2312BP HW12 FW022 01 02 03 04 05 06 07 08
01A02 CONTROL-LAN TN799DP HW01 FW012 u u u u u u u u
u u u u u u u u
17
01A03 MAINTENANCE/TEST TN771DP HW03 FW019 u 02 03 04
01A04 DIGITAL LINE TN2224CP HW08 FW015 01 02 03 04 05 06 07 08
09 10 11 12 13 14 15 16
17 p 19 20 21 22 23 24
01A05 DIGITAL LINE TN2224CP HW08 FW015 01 02 03 04 05 06 07 08
09 10 11 12 13 14 15 16
17 18 19 20 21 22 23 24





SYSTEM CONFIGURATION

Board Assigned Ports
Number Board Type Code Vintage u=unassigned t=tti p=psa

01A06 DIGITAL LINE TN2224CP HW08 FW015 01 02 03 04 05 p 07 08
09 10 11 12 13 14 15 16
17 18 19 20 21 22 23 24
01A07 ANALOG LINE TN793CP HW05 FW006 01 02 03 04 05 06 07 08
09 10 11 12 13 14 15 16
17 18 19 20 21 22 23 24
01A08 DIGITAL LINE TN2224B 000003 01 02 03 04 p 06 07 08
09 10 11 12 13 14 15 16
17 18 p 20 21 22 23 p
01A09 DIGITAL LINE TN2224 000004 01 02 03 04 05 06 07 08
p 10 11 12 13 14 15 16
17 18 19 20 21 22 23 24
01A11 CO TRUNK TN747B 000029 01 u u u u u u u




SYSTEM CONFIGURATION

Board Assigned Ports
Number Board Type Code Vintage u=unassigned t=tti p=psa

01A12 DS1 INTERFACE TN464GP HW06 FW013 01 02 03 04 05 06 07 08
09 10 11 12 13 14 15 16
17 18 19 20 21 22 23 24
u u u u u u u u
01A13 DS1 INTERFACE TN464HP HW02 FW018 01 02 03 04 05 06 07 08
09 10 11 12 13 14 15 16
17 18 19 20 21 22 23 24
u u u u u u u u
01A14 IP MEDIA PROCESSOR TN2602AP HW02 FW009 01 02 03 04
01A15 POWER SUPPLY 655A
01B00 POWER SUPPLY 655A
01B01 IP SERVER INTFC TN2312BP HW12 FW022 01 02 03 04 05 06 07 08





SYSTEM CONFIGURATION

Board Assigned Ports
Number Board Type Code Vintage u=unassigned t=tti p=psa

01B02 CONTROL-LAN TN799DP HW01 FW015 u u u u u u u u
u u u u u u u u
17
01B03 CALL CLASSIFIER TN744E 000004 01 02 03 04 05 06 07 08
01B04 DIGITAL LINE TN2224CP HW08 FW015 01 02 03 04 05 06 07 08
09 10 11 12 13 14 15 16
17 18 19 20 21 22 23 24
01B05 DIGITAL LINE TN2224CP HW08 FW015 01 02 03 04 05 06 07 08
09 10 11 12 13 14 15 16
17 18 19 20 21 22 23 24
01B06 DIGITAL LINE TN2224CP HW08 FW015 01 02 03 04 05 06 07 08
09 10 11 12 13 14 15 16
17 18 p 20 21 22 23 24




SYSTEM CONFIGURATION

Board Assigned Ports
Number Board Type Code Vintage u=unassigned t=tti p=psa

01B07 ANALOG LINE TN793CP HW05 FW006 01 02 03 04 05 06 07 08
09 10 11 12 13 14 15 16
17 18 19 20 21 22 23 24
01B08 DIGITAL LINE TN2224CP HW01 FW015 01 02 03 04 05 06 07 08
09 10 11 12 13 14 15 16
17 18 19 20 21 22 23 24
01B09 DIGITAL LINE TN2224CP HW01 FW014 01 02 03 04 05 06 07 08
09 10 11 12 13 14 p 16
17 p 19 20 21 22 23 24
01B12 DS1 INTERFACE TN464HP HW01 FW018 01 02 03 04 05 06 07 08
09 10 11 12 13 14 15 16
17 18 19 20 21 22 23 24
u u u u u u u u




SYSTEM CONFIGURATION

Board Assigned Ports
Number Board Type Code Vintage u=unassigned t=tti p=psa

01B13 DS1 INTERFACE TN464HP HW02 FW018 01 02 03 04 05 06 07 08
09 10 11 12 13 14 15 16
17 18 19 20 21 22 23 24
u u u u u u u u
01B14 DS1 INTERFACE TN464HP HW02 FW018 01 02 03 04 05 06 07 08
09 10 11 12 13 14 15 16
17 18 19 20 21 22 23 24
u u u u u u u u
01B15 POWER SUPPLY 655A
01C00 POWER SUPPLY 655A
01C01 CONTROL-LAN TN799DP HW01 FW017 u u u u u u u u
u u u u u u u u
17




SYSTEM CONFIGURATION

Board Assigned Ports
Number Board Type Code Vintage u=unassigned t=tti p=psa

01C02 CONTROL-LAN TN799DP HW01 FW015 u u u u u u u u
u u u u u u u u
17
01C03 DIGITAL LINE TN2224CP HW08 FW015 01 02 03 04 p 06 07 08
09 10 11 12 13 14 15 16
17 18 19 20 21 22 23 24
01C04 DIGITAL LINE TN2224CP HW08 FW015 01 02 03 04 05 06 07 08
09 10 11 12 13 14 15 16
17 18 19 20 21 22 23 24
01C05 DIGITAL LINE TN2224CP HW08 FW015 01 02 03 04 05 06 07 08
09 10 11 12 13 14 15 16
17 18 19 20 21 22 23 24





SYSTEM CONFIGURATION

Board Assigned Ports
Number Board Type Code Vintage u=unassigned t=tti p=psa

01C06 DIGITAL LINE TN2224CP HW08 FW015 01 02 03 04 05 06 07 08
09 10 11 12 13 14 15 16
17 18 19 p 21 22 23 24
01C07 ANALOG LINE TN793CP HW05 FW006 01 02 03 04 05 06 07 08
09 10 11 12 13 14 15 16
17 18 19 20 21 22 23 24
01C08 DIGITAL LINE TN2224CP HW08 FW015 01 02 03 04 05 06 07 08
09 10 11 12 13 14 15 16
17 18 19 20 21 22 23 24
01C09 ANALOG LINE TN793 000006 01 02 03 p 05 06 07 08
09 10 11 12 p p p p
p p p p p 22 23 24





SYSTEM CONFIGURATION

Board Assigned Ports
Number Board Type Code Vintage u=unassigned t=tti p=psa

01C10 ANALOG LINE TN793B 000002 01 02 03 04 05 06 p 08
09 p 11 12 13 p p p
p p p p p p p p
01C11 CONTROL-LAN TN799DP HW01 FW007 u u u u u u u u
u u u u u u u u
17
01C12 DS1 INTERFACE TN464GP HW06 FW008 01 02 03 04 05 06 07 08
09 10 11 12 13 14 15 16
17 18 19 20 21 22 23 24
u u u u u u u u
01C13 DS1 INTERFACE TN464HP HW02 FW018 01 02 03 04 05 06 07 08
09 10 11 12 13 14 15 16
17 18 19 20 21 22 23 24
u u u u u u u u



SYSTEM CONFIGURATION

Board Assigned Ports
Number Board Type Code Vintage u=unassigned t=tti p=psa

01C14 DS1 INTERFACE TN464HP HW02 FW018 01 02 03 04 05 06 07 08
09 10 11 12 13 14 15 16
17 18 19 20 21 22 23 24
u u u u u u u u
01C15 POWER SUPPLY 655A
01D00 POWER SUPPLY 655A
01D01 CONTROL-LAN TN799DP HW01 FW017 u u u u u u u u
u u u u u u u u
17
01D02 VAL-ANNOUNCEMENT TN2501AP HW03 FW018 01 02 03 04 05 06 07 08
09 10 11 12 13 14 15 16
17 18 19 20 21 22 23 24
25 26 27 28 29 30 31 32
33



SYSTEM CONFIGURATION

Board Assigned Ports
Number Board Type Code Vintage u=unassigned t=tti p=psa

01D03 DIGITAL LINE TN2224CP HW08 FW015 01 02 03 04 05 06 07 08
09 10 11 12 13 p 15 16
17 18 19 20 21 22 23 24
01D04 DIGITAL LINE TN2224CP HW08 FW015 01 02 03 04 05 06 07 08
09 10 11 12 13 14 15 16
17 18 19 20 21 22 23 24
01D05 DIGITAL LINE TN2224CP HW08 FW015 01 02 03 04 05 06 07 08
09 10 11 12 13 14 15 16
17 18 p 20 21 22 23 24
01D06 DIGITAL LINE TN2224CP HW08 FW015 01 02 03 04 05 06 07 08
09 10 11 12 13 14 15 16
17 18 19 20 21 22 23 24
01D07 ANALOG LINE TN746B 000009 01 02 03 04 05 06 07 08
09 10 11 12 13 14 p p



SYSTEM CONFIGURATION

Board Assigned Ports
Number Board Type Code Vintage u=unassigned t=tti p=psa

01D08 ANALOG LINE TN793 000006 01 02 03 04 05 p p p
09 p 11 12 p 14 15 16
17 18 19 20 21 22 23 24
01D09 ANALOG LINE TN793 000006 01 02 03 04 05 06 07 08
09 10 11 12 13 14 15 16
p 18 19 20 21 p p 24
01D10 ANALOG LINE TN793B 000006 01 02 03 04 05 06 p 08
09 10 11 12 p p p p
p p p p p p p p
01D11 CONTROL-LAN TN799DP HW01 FW017 u u u u u u u u
u u u u u u u u
17





SYSTEM CONFIGURATION

Board Assigned Ports
Number Board Type Code Vintage u=unassigned t=tti p=psa

01D12 DS1 INTERFACE TN464GP HW06 FW008 01 02 03 04 05 06 07 08
09 10 11 12 13 14 15 16
17 18 19 20 21 22 23 24
u u u u u u u u
01D13 DS1 INTERFACE TN464HP HW02 FW018 01 02 03 04 05 06 07 08
09 10 11 12 13 14 15 16
17 18 19 20 21 22 23 24
u u u u u u u u
01D14 DS1 INTERFACE TN464HP HW02 FW018 01 02 03 04 05 06 07 08
09 10 11 12 13 14 15 16
17 18 19 20 21 22 23 24
u u u u u u u u
01D15 POWER SUPPLY 655A

 

[4merAvaya]

1. You currently are configured with redundant IPSI's in a single port network. The cabinets are equipped with redundant power supplies. I would recommend adding 2 IPSI's to the new port network as well.

2. You will need a MedPro in the new Port Network to 'talk' to Port Network 1.

3. Splitting the C-LAN boards used by the AES server should not be an issue.

4. Try to split your ISDN-PRI D-channels over both Port Networks, i.e Primary D in 01A, Backup D in 02A, etc..

Kevin

 

[telcomwork]

Thank you Kevin and I'll take your advice and expertise!

So keeping the IPSI in 01b even if there isn't a MedPro in that cabinetis what I should do?

Do you split youe CLANs for AES?

 

[telcomwork]

Kevin you were clear please ignore just wanted to be sure and re-read your response. Thanks again!