I have a user who is extension 1108. She wants a DID, but all of our DID's are in the 6700 to 6800 range. She wants to keep her same extension though. We are using 6408D+. Can anyone give me some direction? I have been strictly NEC NEAX2400 for almost three years and going back to avaya is tough.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations wOOdy-Soft on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Adding a DID without changing the extension
- Thread starter skhhsi
- Start date
If the DID is via PRI T1, you can do digit translations on the trunk group and replace 1108 with something like 6708.
Or you could create a VDN 6708 with a vector that routes to extension 1108.
Or you could create a x-port 6708 and bridge it onto her phone as an additional call appearance.
Or you could create a hunt group 6708 with 1108 as the only member. Voicemail may be an issue with this one though.
Hopefully one of those helps.
Or you could create a VDN 6708 with a vector that routes to extension 1108.
Or you could create a x-port 6708 and bridge it onto her phone as an additional call appearance.
Or you could create a hunt group 6708 with 1108 as the only member. Voicemail may be an issue with this one though.
Hopefully one of those helps.
telecomturner
Technical User
- Apr 5, 2004
- 64
tell the user they will get a new number
Several ways around;
just two: If you are on PRI, you should be able to set the conversion on the trunk page:
INCOMING CALL HANDLING TREATMENT
Service Called len Called Del insert
public-ntwrk 9 123456708 5 1108
another way to do it, is create a 'virtual' set on 1108,
that has bridged appearences on 6708 or the other way around.
just two: If you are on PRI, you should be able to set the conversion on the trunk page:
INCOMING CALL HANDLING TREATMENT
Service Called len Called Del insert
public-ntwrk 9 123456708 5 1108
another way to do it, is create a 'virtual' set on 1108,
that has bridged appearences on 6708 or the other way around.
- Thread starter
- #6
- Thread starter
- #7
I would simply create the 'X' ported DID extension with a cover path which sends all calls to cover where the first point of cover is a cover-answer-group with 1108 as the only member. If they want VM on the DID make the next point on the cover path your Audix hunt grp.
LH
LH
- Status
Similar threads
- Question
- Question
- Question
- Question