Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Chriss Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Add subnet
- Thread starter Georgeee
- Start date
VinceWhirlwind
Technical User
In general,
- on your "core" switch/router, create the VLAN, then create the VLAN interface, giving it the IP address you've chosen as the default GW for that subnet.
- configure that VLAN on the correct trunk(s) from the "core" where you want that VLAN to go
- configure that VLAN on the trunk(s) into your edge switch(es)
- configure that VLAN on the edge switch ports where it is required
- on your "core" switch/router, create the VLAN, then create the VLAN interface, giving it the IP address you've chosen as the default GW for that subnet.
- configure that VLAN on the correct trunk(s) from the "core" where you want that VLAN to go
- configure that VLAN on the trunk(s) into your edge switch(es)
- configure that VLAN on the edge switch ports where it is required
- Status
Similar threads
- Locked
- Question