Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TouchToneTommy on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Activating a DID
- Thread starter lhuegele
- Start date
you need to know what your DID range is. If you don't you should call your carrier and get it from them. Say your DID range is 3500-3519. To find an unused one do the following:
LD 20
REQ PRT
TYPE LUDN (list unused DNs)
DN 35 (then press return)
then look for anything between 3500 and 3519. 3520 would not be part of that range. Then just assign one of those numbers to your phone:
key xx SCR 35XX
that's it!
LD 20
REQ PRT
TYPE LUDN (list unused DNs)
DN 35 (then press return)
then look for anything between 3500 and 3519. 3520 would not be part of that range. Then just assign one of those numbers to your phone:
key xx SCR 35XX
that's it!
- Status
Similar threads
- Locked
- Question
- Locked
- Question