Access 2000 project converted to Access 97

[Cynergy13]

I was wondering if anyone could point me in the right direction on this one.

I have completed a project for distribution in Access 2000. But some of the sites that is it going to do not have Access 2000, they have Access 97, in addition to this, some sites do not have either (I am hoping that they all at least have computers, (it's a project for a group of small non-profits)).

Now here are my choices,

1) Turn my project into a distributable application by using the MOD runtimes. I can do this but there is a problem: I have not been very successful at creating a distribution copy, the distributions keep dying on me or won't install properly (I was wondering if anyone had any luck with MOD)

2) convert the Access 2000 application to 97, in which case I would like someone to show me the way to convert some of the modules.

3) Somehow find some way for those sites without Access2000 to find Access2000 and then install this application, with the only problem here being some of he computers being used might not be able to handle Access2000. (386 or 486)

Any takers?

Thomas

 

[Aivars]

Hi!

Your question is discussed by far in Tek_Tips forums before. Look at previous threades!

Aivars

 

[Cynergy13]

Great, could you tell me what to search for?