Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TouchToneTommy on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Above Tolerance RPM on fans
- Thread starter fgibson
- Start date
Had this same problem with a BCM 200. I got with Nortel on it and it is a known issue with the 200 and the 400. It ended up being a hardware issue. Had to replace the MSC card and the base function tray. The base function tray ended up having blown capacitors. There is also a patch related to this problem that might help.
Only options I can give you is if you have access to Nortel is to get a hold of them and try getting replacement parts.
Only options I can give you is if you have access to Nortel is to get a hold of them and try getting replacement parts.
- Thread starter
- #3
- Status
Similar threads
- Locked
- Question
- Locked
- Question
- Locked
- Question
- Locked
- Question