Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Rhinorhino on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

? about my G450 MGC list

Status
Not open for further replies.
G3rtech

G3rtech

Technical User
Joined
Mar 7, 2003
Messages
313
Location
US
I'm setting up a few G450s and I had a question. I have one already setup by a vendor and I was looking at its list. There are two CLAN addresses and one S8730 address listed. Shouldn't all of these be my server addresses and not my clans?

Thanks!
 
Sort by date Sort by votes
I just put in two clan addresses. I'm good to go.
 
Upvote 0 Downvote
it could be your CLANs and the PE common shared address (active) for both S8730's, if you have "PE" (Processor Ethernet) enabled. You no longer need CLANs to register gateways, CLANs are going the way of the dodo (extinct)



Mitch

AVAYA Certified Expert
 
Upvote 0 Downvote
Thanks for the info!! Have a good weekend!
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

Craft01
  • Locked
  • Question Question
adding ESS and LSP in MGC list
Replies
1
Views
539
JefferP
JefferP
T
  • Locked
  • Question Question
Avaya G450 with ACCM
Replies
2
Views
568
nutrinoman
nutrinoman
R
  • Locked
  • Question Question
G450 Analog-test command
Replies
0
Views
520
Red19
R
ZakiHome
  • Locked
  • Question Question
G450
Replies
2
Views
560
ZakiHome
ZakiHome
S
  • Locked
  • Question Question
【CMS R21】About button icon
Replies
0
Views
455
Sushi Guy
S

Part and Inventory Search

Sponsor

Back
Top