aar

[Montero84]

Hello,

I am working on an old Definity G3siV6. I configured the aar table and the udp. I am able to route calls using the udp code, however, is there a way to dial an extension in another PBX without the need of using the aar code? I know how to do this in CM but I am having problems making it to work on this switch. any ideas? thanks!

 

[AvayaTier3]

udp and aar have been around for years. g3v6 udp and aar are the same as the newer versions of CM udp and aar.

A great teacher, does not provide answers, but methods to teach others "How and where to find the answers"

bsh

37 years Bell, AT&T, Lucent, Avaya
Tier 3 for 27 years and counting

http://bshtele.com

 

[Montero84]

Avayatier3, Thanks for the reply. I think I didn't explain well what I need. I can configure the aar and udp and it works. i.e I configured aar code 110 and configured udp 11 I am able to dial 11+ 4 digit extension and works fine... in CM, I can configure the same setup.. aar code 11 and I can dial either way using 11+4 digit extension or the 4 digits extension only. the udp form is a bit different than the uniform dial plan in CM. Thanks again!

 

[AvayaTier3]

http://www.tek-tips.com/viewthread.cfm?qid=1603259&page=1

A great teacher, does not provide answers, but methods to teach others "How and where to find the answers"

bsh

37 years Bell, AT&T, Lucent, Avaya
Tier 3 for 27 years and counting

http://bshtele.com

 

[Montero84]

AvayaTier3,

The information is great... that is the way I can do it in CM, but I am having problem figuring this out in Definity R6. The form for uniform dial plan is different and I am having problems building a matching patter. I have in local PBX extensions from 1150 to 1170 in the other PBX I have extension from 1180 to 1199, in CM I can run a change uni 11 and add 118 and 119 as aar... in Definity R6 I get lost. i.e of the form in Definity R6. Thanks agian!

UNIFORM DIALING PLAN
Ext Codes: 11dd

Ext Code: 1xxx Type:

Ext Code: 11xx Type:

dd Type dd Type dd Type dd Type dd Type

5x: 6x: 7x: 8x: 9x:

50: 60: 70: 80: 90:
51: 61: 71: 81: 91:
52: 62: 72: 82: 92:
53: 63: 73: 83: 93:
54: 64: 74: 84: 94:
55: 65: 75: 85: 95:
56: 66: 76: 86: 96:
57: 67: 77: 87: 97:
58: 68: 78: 88: 98:
59: 69: 79: 89: 99:

 

[Montero84]

I think I got this resolved... Thanks!