AAR/Route pattern/Trk grp.

[jopats]

If anyone has an idea for this. G3I V11...I have a 5 digit AAR, going through a route pattern with 3 trunk group options. The calls will not route through the first option..the trunk I want them to use..they use the second option. If the call is placed using 11 digits, it uses the trunk group it should and the one I want it to use as first option in r/pattern. The frl's are set higher in the route pattern options then either trunk group is set for...Why is it not hitting the first option?

 

[1a22ip]

Please supply AAR Analysis and Route examples. Also include Trunk group FRL's

Thanks
ED

1a2 to ip I seen it all

 

[jopats]

Ed, frl's in r/pattern are 3, trunk goups are 1.
AAR: 102. min 7 max 7,
r/pattern: del 3, insert 1617891, pfx mrk, 1

 

[RTMCKEE]

Try making the pfx mrk blank. Thats how we have ours set up.

According to the manual:

1 • Send a 1 on 10-digit calls, but not on 7-digit calls.
Use Prefix Mark 1 for HNPA calls that require a 1 to indicate long-distance calls.

blank For tie trunks, leave this field blank.

Needless to say, mine are on tie lines.

RTMCKEE

CM 2.1.1
Prologix R9.05
Modular Messaging 1.1

 

[1a22ip]

I concur with RTMCKEE You are placing the 1 in the inserted digits. Mine are also blank

Hope this helps
ED

1a2 to ip I seen it all