Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TouchToneTommy on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

AA ring volume 2

Status
Not open for further replies.

Mountainbear

Programmer
Sep 27, 2009
369
CA
Is there a volume adjust for the CCR tree options? They ring lower volume than the incoming lines.
 
No, volume adjustment on a set is for all ringing.

Calls coming in ring on line ports.
Calls coming in to sets via AA ring on Intercom keys.

Is it possible option on CCR point to Hunt Groups and that the HG's use a different ring pattern?



________________________________________

Add me to LinkedIN

small-logo-sig.png

=----(((((((((()----=
Toronto, CAN
 
Here is a test

Feature * 80, listen to the volume
Now call in from outside, listen to the volume
Now intercom the phone from another phone, listen to the volume
Now call in from outside and use AA/CCR to get to the same set, listen to the volume

All 4 should have the same volume.
Only exception is Double Ring form intercom or voice mail transfers or Distinctive Ring on lines or HG's is in use.



________________________________________

Add me to LinkedIN

small-logo-sig.png

=----(((((((((()----=
Toronto, CAN
 
Thanks Curlycord. I always thought intercom was lower. I will do your test for sure. I may need to see if I can add a nearby phone as an alternate ext. It is only an office so don't need anything really loud.
 
The volume control controls the volume of the particular function the phone is doing at the time. Adjust the volume of the phone for these functions seperately: intercom ringing, outside line ringing, hunt group ringing, handset volume, handsfree volume. All volumes will remain how you set them provided the < USE SET VOLUME > is turned on in System Programming.

Marv ccna

 
Yes you might be right it is lower based on the user doing what Marv states above where as invoking F*80 is just Ringer Volume.
And again per Marv I always program Set Volume or it will always default to System Volume, I find a lot of systems are not programmed this way....lazy programming.

Adjusting the volume while it's ringing from AA would do the job without having to worry about if HG or not.

Star for Marv making it more clear.

________________________________________

Add me to LinkedIN

small-logo-sig.png

=----(((((((((()----=
Toronto, CAN
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top