a pstn line as a trunk group? 1

[moosk]

Hello.
We have Definity G3siV6 .
Is there a chance that a normal analog pstn line (like any subscribe can get) can be treated as an incoming trunk group?
So I don`t connect an analog station to it, but instead I do connect my Definity?
Can this be done with the TN746B circuit pack?

Cheers
Marcin

 

[jordy5535]

You would still need to wire it to a TN747 CO trunk pack. Be sure to program the trunk group as loop-start as opposed to ground-start if it is loop-start. Also, it is recommended that you don't mix ground-start trunks and loop-start (pstn) on the same TN747 pack.

 

[moosk]

Thanks