Apr 30, 2019 #1 VoIPP MIS Jan 28, 2009 556 US IPO 8.1(43) 9608 phone has single column display and I can't figure out how to change it to a dual column display like all the other phones. The manual says to use {Home Button > Options & Settings > Phone Screen Width} but that option does not exist on this phone?
IPO 8.1(43) 9608 phone has single column display and I can't figure out how to change it to a dual column display like all the other phones. The manual says to use {Home Button > Options & Settings > Phone Screen Width} but that option does not exist on this phone?
Apr 30, 2019 1 #2 TouchToneTommy Vendor Dec 16, 2001 7,977 US Your 9608 has firmware that can't be downgraded to match your IPO on 8.1. The only remedy is to upgrade the IPO to 9.1 Upvote 0 Downvote
Your 9608 has firmware that can't be downgraded to match your IPO on 8.1. The only remedy is to upgrade the IPO to 9.1
Apr 30, 2019 #3 holdmusic34 Vendor Dec 21, 2012 3,757 AU good job TTT. Depending on the URI configuration the ICR can be completely ignored. If your URI is configured to use internal data then the IP Office will look into the user's SIP tab and if you have *'s it will look into ICR. A madman with a taste for speed. Upvote 0 Downvote
good job TTT. Depending on the URI configuration the ICR can be completely ignored. If your URI is configured to use internal data then the IP Office will look into the user's SIP tab and if you have *'s it will look into ICR. A madman with a taste for speed.