9608 Call Settings

[fieldtechonIR]

I am curious about how these settings are saved. It seems on that when a user makes changes to settings under Features>Call Settings the setting is saved and moves with the user. I was under the impression that these were set on the phone and if you cleared the phone they defaulted. There are some settings I would like to push out to all users but it looks like you can't via the 46xx other than the ring tone a few other thing but I have not dug deeper into some of the other settings. Wondering if anyone has any more knowledge on this. thanks.

 

[gwebster]

Settings are backed up to an HTTP server designated by SET BRURI.

 

[fieldtechonIR]

This setting is not enabled in the 46xxsettings file so I do not believe this is the cause. Its hashed out and I have not set it. I don't think that setting is derived any other way than explicitly setting it. I also don;t believe this is the case becase if you hot desk a user onto a phone these setting instantly change. My guess is that if it were updating via http it might take a little longer, but again just a guess. I see nothing about the call setting save in the docs.

 

[intrigrant]

Call settings are saved in IP Office.
If a user hotdesks to another type of phone like a 1408 or 9508 or whatever these settings are available on that phone.
The phone is just a dumb terminal on IP Office.

 

[fieldtechonIR]

The fact that they are saved is surprising to me. It's unfortunate you can't set these in manager.