Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations bkrike on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

*9000???

Status
Not open for further replies.
milehighip

milehighip

Vendor
May 18, 2004
32
US
I just read in a tech bullitin that SOHO is adding a *9000 SC to turn the relay on for "MAINTENANCE" and this first POT port on an ATM4 can also be used for RAS. I just cant quite put all the steps together to make the POT 1 port on either of these boxes functional. This would be helpful with all of the IP406V2's going out with integral messaging :(... It may also be a good backup if the internet connection gets hosed up.

Any ideas, surely someone has played with this.
 
Sort by date Sort by votes
Yeah, Thats it, any idea on the specifics of operation and setup?
 
Upvote 0 Downvote
It is not meant for RAS but for remote service.
With the *9000* you can activate a relay switching trunk 1 into "modem" mode so the maintainer can diallin to trunk 1 for remote service.
 
Upvote 0 Downvote
Sorry, its all setup by default, no additional programming needed.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

SuperJenks
  • Locked
  • Question
How to use Ras dialup for maintenance *9000*
2
Replies
25
Views
582
tlpeter
tlpeter
RotoOrb
  • Locked
  • Question
*9000* Maintenance mode
Replies
5
Views
121
intrigrant
intrigrant
testinads2005
  • Locked
  • Question
*9000* and MAINTENANCE
Replies
2
Views
65
IPGuru
IPGuru
cjinsocal581
  • Locked
  • Question
Short Code 9000 for MAINTENANCE 1
Replies
5
Views
95
sizbut
sizbut

Part and Inventory Search

Sponsor

Back
Top