Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations bkrike on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

8X24 to MICS 6.1

Status
Not open for further replies.
tjcom

tjcom

Technical User
Feb 15, 2005
252
CA
Is it possible to take an 8X24 system info and dump it into an MICS 6.1?

Thanks
 
Sort by date Sort by votes
See faq799-5000

Works. Can take longer than hand bombing, but if you are able to leave lap top in place and come back for it later might work for you. Don't sit and watch it though.

PhM



VVV
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

P
  • Locked
  • Question
Incoming calls go to dial tone on Nortel MICS-XC 7.0
Replies
11
Views
1K
curlycord
curlycord
potrocito
  • Locked
  • Question
MICS 6.1 Incomplete CLID after STIR/SHAKEN 2
Replies
2
Views
308
exsmogger
exsmogger
Don W
  • Locked
  • Question
Mics software upgrade tools
Replies
9
Views
605
curlycord
curlycord
jsaad
  • Locked
  • Question
MICS GATC going dead 4
2
Replies
24
Views
1K
curlycord
curlycord
RedMaligator
  • Locked
  • Question
Nortel MICS connected to Call Pilot
Replies
10
Views
587
curlycord
curlycord

Part and Inventory Search

Sponsor

Back
Top