8 fax lines to tie line... 4

[takmsdsm]

I have a total of 8 numbers that i want to go into a tie line that will go to a fax server. Where would i set this up at? Any help in the right direction would be great.

This is an M1 11c

 

[Dougo123]

My inbound trunks are 0 also and It works fine.

If you change the trunk type you have to change the rout type.
TYPE RDB
CUST 00
DMOD
ROUT 3
DES LOOP
TKTP COT
NPID_TBL_NUM 0
PRIV NO
SAT NO
RCLS EXT
DTRK NO
ISDN NO
PTYP ACO
AUTO NO
ICOG IAO
RANX NO
SRCH LIN
TRMB YES
STEP
ACOD 8003
CPP NO
TARG
CLEN 1
BILN NO
OABS
TIMR ICF 512
OGF 512
EOD 13952
DSI 34944
NRD 10112
DDL 70
ODT 4096
RGV 640
FLH 510
GRD 896
SFB 3
CRD 512
TFD 0
LEXT 100
SST 3 0
NEDC ETH
FEDC ETH
CPDC NO
SPCT IMM
HOLD 02 02 40
SEIZ 02 02
RGFL 02 02
RVSD 08 31
ILLR 02 02
DRNG NO
CDR NO
MUS NO
MR NO
MANO NO
EQAR NO
OHQ NO
OHQT 00
TTBL 0
OHTD NO
PLEV 2
MCTS NO
ALRM NO
ART 0


PAGE 002

SGRP 0
AACR NO

 

[takmsdsm]

Awesome, i just rebuild RLI 8 with FRL of 0 (i dont know why it was set to 1 anyways, maybe i was reading something wrong) and now it works. You guys are the greatest. I owe you a million thanks. I was losing sleep over this stupid thing.

 

[Dougo123]

Great, good job. Actually John, the reason mine is working is because I'm grabbing the trunk with the access code and bypassing everything

 

[johnpoole]

thanks for the backup doug, it's almost impossible to trouble shoot (for me anyway) without my hands on the keyboard.. guess 30 years in the switchroom has spoiled me.

john poole
bellsouth business
columbia,sc

 

[takmsdsm]

Doug and John, you guys were awesome. I hope one day i can help someone out as much as you guys do. I havent felt like such a noob since i started playing with computers 15 years ago. Whats a dos prompt? I got picked for this position a couple months ago because i have a background in IT, but i knew NOTHING about PBXs. Its slowly coming to me tho. Thanks again to you both.