6X16 CLID

[rcr3530]

Hi all, I just need to know if I can have a Caller ID installed in a 6X16 system, there is any adapter for this?

Thanks

 

[Brutalis]

On your 6X16 KSU you can install a C6 module that will give you call display. However, the functionality of the module is limited and it's expensive. You might be better off upgrading to a cics with a clid line card

 

[norstarboy125]

Make sure that your cabinet is DR5 and the C6 will only auto clid info to 1 set where the other sets have to use the f811 to see clid and Brutalis is right they are expensive i have installed one within the past 3 months.

 

[rcr3530]

Thanks

 

[RikRodgers]

Another "poor man's" option-

Wire line 1, 2, etc... to jacks beside your recpt. set, and pick up a couple analog clid displays at Target.