4621 firmware upgrade txt files

[fgines]

Looking for a way to upgrade the 4621's firmware without loosing the files...speed dial, log files etc.

 

[Bas1234]

Setup a FTP server, the nedit the 46settings.txt file.
Search for;

###### 46xx Automatic Backup/Restore Settings ########
##
## RESTORESTAT enables/disables the automatic backup and
## restore of user data. Applies to both FTP and HTTP
## backup/restore. This setting does not apply to the
## 4602 sets.
##
## A value of 1 enables Backup/Restore.
## A value of 0 disables Backup/Restore.
##
## FTPUSERSTAT sets user permissions on modifications to
## server names and directory paths used for FTP
## backup/restore. Does not apply to HTTP backup/restore.
##
## When FTPUSERSTAT is set to 0, the user can only use the
## server and path data administered via DHCP or settings
## file.
##
## When FTPUSERSTAT is set to 1, the user can specify
## alternative FTP servers or directory paths. The default
## is 1.
##
## When FTPUSERSTAT is set to 2, the user can specify
## alternative FTP directory paths but is not allowed to
## specify alternative FTP servers.
##
## FTPSRVR specifies the IP Address of the default FTP
## Server. May be a dotted-decimal address or DNS string.
## Depending on FTPUSERSTAT setting, may be overridden by
## the user.
##
## FTPDIR specifies the default directory path used for
## storage and retrieval of phone user information.
## Depending on FTPUSERSTAT setting, may be overridden by
## the user.
##
SET RESTORESTAT 1
SET FTPUSERSTAT 1
SET FTPSRVR 135.18.18.18
SET FTPDIR myftpdir

Then on the phone press options and go to the backup options.

___________________________________________
It works! Now if only I could remember what I did...
___________________________________________

 

[Bas1234]

Don't forget to remove the ## in front of the SET options.

___________________________________________
It works! Now if only I could remember what I did...
___________________________________________

 

[Bas1234]

Or have a look here;

http://www.tek-tips.com/viewthread.cfm?qid=1458001&page=6

___________________________________________
It works! Now if only I could remember what I did...
___________________________________________

 

[Westi]

BAS
I was wondering why you weren't sending a link :-D

Joe W.

FHandw., ACS

If you can't be good, be good at it!

 

[Bas1234]

That new search engine $ux, couldn't find it the first time...

___________________________________________
It works! Now if only I could remember what I did...
___________________________________________

 

[amriddle01]

Yeah, I hate the new search too, it doesn't open your searches in a new window anymore which is really annoying

ACS - IP Office Implement

"I'm just off to Hartlepool to buy some exploding trousers