Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations bkrike on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

4610SW - Wrong Set Type

Status
Not open for further replies.
Naperguy1

Naperguy1

Programmer
Dec 1, 2003
106
US

We have a location that has a phone that stopped working. It pops up with "Wrong Set Type" We have tried the reset code with no success. Is there any way to completely wipe the phone to get it operational? Thx in advance.
 
Sort by date Sort by votes
Mute C L E A R (2 5 3 2 7), then you need to put your IP's back in, and let the phone go, it will download the bin files and reset again, and it may even come back and say wrong set type again, but let it sit for a minute or two, then it will probably come back. I have had that happen to me more than twice. Drove me crazy.

Good Luck
 
Upvote 0 Downvote
After about 3 clear commands and due patience it gave us the extension command. Thx for your help, CK666 and MG
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

lexer
  • Question
Avaya phone set 4610SW SIP firmware
Replies
2
Views
179
lexer
lexer
Furrye
  • Locked
  • Question
Call for other CM by Avaya IP Phone 4610sw, ASA Configuration
Replies
1
Views
494
Konri
Konri
abdou9
  • Locked
  • Question
Avaya sbce sending rtp to the wrong AMS causing one way audio
Replies
1
Views
378
mattKnight
mattKnight
BJetter
  • Locked
  • Question
DID trunk group type, can you pass more than one set of digits
Replies
1
Views
1K
JefferP
JefferP
Stinney
  • Locked
  • Question
Can't set SIP signaling group to not add '+' 1
Replies
2
Views
6K
Instructor of Avaya
Instructor of Avaya

Part and Inventory Search

Sponsor

Back
Top