4610

[nix012]

System G3si R11.03.3.538.0

Extension type 4610.

Not able to dial the digits if get into the IVR or any telebanking application

Works from the digital handset

changed the terminal paramanet to suit Australia
any idea

nixon

 

[lifeisloud]

Hi,

If you "enable test 146" and reset your DS1 board you will be able to send tones from your ip handset to line.

I know this sounds strange but we had a load of sites where we had "disabled test 146" because of a problem with the TN2464's, and once we enabled the test and reset the card (you need to pull it and re-insert it) the tones then worked with the 46xx.

Andy

 

[Simon190]

Guys,

I understand that the 4610 has to be run as a 4620 on a version 11 switch. How do you get the 4610 to be a 4620. When I set the switch to 4620, the set comes up as incorrect switch type.

Thanks.

Simon