4600 ip phone db setting?

[wilsontec]

Thank everybody

In 4600 series phone set . Where can i set transmit db level to increase voice level to far end ?

 

[Midstream]

change terminal-parameters 6400/607A1/4600/2420 Page 1 of 1

6400/607A1/4600/2420-TYPE TERMINAL PARAMETERS

Default Parameter Set: 1 Customize Parameters? y
Note: LEVELS do not apply to the 4600 terminals.
OPTIONS
Display Mode: 1 Handset Expander Enabled? y
Volume for DCP Types: retain handset and speaker between calls
Volume for IP Types: default settings used to begin each call
PRIMARY LEVELS
Voice Transmit (dB): +2.5 Voice Sidetone (dB): -11.0
Voice Receive (dB): -2.0 Touch Tone Sidetone (dB): -25.0
Touch Tone Transmit (dB): +1.0



BUILT-IN SPEAKER LEVELS
Voice Transmit (dB): 0.0 Voice Receive (dB): 0.0
Touch Tone Sidetone (dB): -12.0
6402 BUILT-IN SPEAKER LEVELS
Voice Receive (dB): -2.0 Touch Tone Sidetone (dB): -19.0

 

[ii8206]

The above command can't apply for 4600 IP Phone,try to set the loss plan using " ch locations-paratment " increase the db loss to "-3" but will also increase the echo sound.

ii8206