Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Chriss Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

4507 Hangs after a "sh run" command

Status
Not open for further replies.
rguidry1

rguidry1

MIS
Joined
Sep 25, 2005
Messages
1
Location
US
While telnetted into my 4507 switch, if I do a sh run command, it starts to build the config, then just hangs there. I have to telnet in through another switch to clear the user. Does anyone have a suggestion?

rguidry1
 
Sort by date Sort by votes
I'd be interested to know if you have the same problem whenever you execute a command that spans more than one page, e.g. like show interface.

Also it'd be useful to know if the same happens if you execute show run from the console. Does it do the same thing?

Please let us know.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

woza
  • Locked
  • Question Question
GNS3: Delete the lines "transport preferred none"
Replies
1
Views
747
DrB0b
DrB0b
jobsp90
  • Locked
  • Question Question
I have a issue in my office hospital network regarding using IPPBX software.
Replies
2
Views
520
DavetheChef
DavetheChef
BleuBell
  • Locked
  • Question Question
Command Rejected : Exceeded NNI ports Allowed
Replies
0
Views
323
BleuBell
BleuBell
darthvader167
  • Locked
  • Question Question
"Wait while I transfer your call"
Replies
0
Views
333
darthvader167
darthvader167
dogg1
  • Locked
  • Question Question
CUCM SNMP Set Command
Replies
1
Views
658
whykap
whykap

Part and Inventory Search

Sponsor

Back
Top