Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Chriss Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

3Com HiperDSP - Sending SNMP traps on faults?

Status
Not open for further replies.
rainman

rainman

ISP
Joined
Mar 22, 2001
Messages
186
Location
US
Does anybody have any good resources on configuring SNMP traps on 3Com/USR HiperDSP TCM1000 shelves? We have a few shelves deployed and we do not have any traps currently configured. What I'm looking to see traps on is:

- T1 PRI/ISDN failure
- environment (chassis / fan)
- anything else critical to the shelf's operation

I've looked thru alot of 3Com documentation and I can't find anything on this, and also it seems 3Com/USR/CommWorks support is dwindling. Any help would be appreciated.


-Rainman
 
Status
Not open for further replies.

Similar threads

dik
  • Locked
  • Question Question
Sending Fax by eMail
Replies
6
Views
2K
dik
dik
stoobiedoo
  • Locked
  • Question Question
Windows 10 softmodem will only connect at 2400
Replies
1
Views
613
LoPath
LoPath
LOKIDOG
  • Locked
  • Question Question
Hayes Modem Won't Install on XP (SOLVED)
Replies
1
Views
507
LOKIDOG
LOKIDOG
goltar
  • Locked
  • Question Question
accessing the com port on a tapi fax modem
Replies
1
Views
449
goltar
goltar
timbath
  • Locked
  • Question Question
Zetafax - part blank pages on receive
Replies
1
Views
336
timbath
timbath

Part and Inventory Search

Sponsor

Back
Top