3750 not handing out DCHP Addresses

[semperfidelis]

Simple connection of a 3750 connected to a small network with a DCHP Server, but after plugging in a PC. I'm unable to get a ip address. After doing a sh config in the switch I get "no ip address" appearing under every interface. I'm sure this is easy for someone, but it is stressing me. Please help and thanks in advance.

 

[kmcferrin]

Do you have your ip-helper address configured in the switch?

 

[MTandSAV]

After doing a sh config in the switch I get "no ip address" appearing under every interface."

not sure if I understand you correctly, but the interfaces of the switch don't get an ip address.
Have you created a dhcp pool on the switch? put the config here so we can have a look, shouldn't be too difficult.

CCNA, CCNP..partly

 

[kmcferrin]

I took his statement to mean that there was a DHCP server on the network, not on the switch. Knowing which is the case would be important too.

 

[semperfidelis]

Thanks everyone for helping. It actually was the ip helper address wasn't entered into the router. I would like to thank everyone for your responses.

 

[vipergg]

I think he thinks every interface is supposed to get a address , this is not true , if the dhcp server was working before putting in the switch then make sure all 3750 ports are set as switchports also issue the "switchport host " command on every interface . Use the interface range command to make the changes in one command .