3 Com wireless 737 not working in XP

[Kurl75]

I have a wireless card that im trying to get drivers installed for on WInXP. The OS will detect the card and even tell me the right name for the card but after I load the drivers for it (updated ones from 3Com's site) It tells me there was a problem with the device and it 'Cannot Start this device'

I know that the drivers for this product are in beta for XP right now but I have another XP machine on my network that the drivers work fine for. Any suggestions ?? Jeremy Leasure
Systems Specialist

My suggestions are just that, suggestions.

 

[dpiggott]

There are updated drivers on the 3com website for some wireless products

 

[jogairan]

I have a similar problem:

OS: winxp
Card: 3com 737

when I insert the card, OS detects it and installs the drivers. I go in there and update the drivers downloaded from 3com for XP. The nework icon in the task bar lights up and states: wireless network detected. when i go in i see my AP and that of my neighbour.
I go in, configure my WEP and SSID. Things work fro about 1 min or 2 and then it is as if the AP has been unplugged. The icon in the task bar now has an X on it and states no wireless networks detected. The interesting thing is that I switched to my cisco 350 card and the same exact senario! I know the AP (even my neighbours) is still active b/c I run netstumbler on a laptop side by side and I have great signal.
Any thoughts? Thank you for your time.