2948 Help! 2

[bobbyforhire]

Just got a 2948 off the bay and would like to know if someone could help me out here.

1)

It's running 4.4(1) , - How can i get the latest IOS?

2)

does that version not have the http web interface? I went to setup the HTTP web management and that was not an option.


3)

when i goto enable and run a dir bootflash i get this.

Console> (enable) dir bootflash

No such file

8653168 bytes available (2750096 bytes used)



4) This is what i have
Console> (enable) sh ver
WS-C2948 Software, Version NmpSW: 4.4(1)
Copyright (c) 1995-1999 by Cisco Systems, Inc.
NMP S/W compiled on Jan 6 1999, 18:02:54
GSP S/W compiled on Jan 06 1999, 12:50:40

System Bootstrap Version: 4.4(1)

Hardware Version: 1.0 Model: WS-C2948 Serial #: JAB0306009D

Mod Port Model Serial # Versions
--- ---- ---------- -------------------- ---------------------------------
1 0 WS-X2948 JAB0306009D Hw : 1.0
Gsp: 4.4(100)
Nmp: 4.4(1)
2 50 WS-X2948G JAB0306009D Hw : 1.0

DRAM FLASH NVRAM
Module Total Used Free Total Used Free Total Used Free
------ ------- ------- ------- ------- ------- ------- ----- ----- -----
1 65536K 16029K 49507K 12288K 3838K 8450K 480K 90K 390K

Uptime is 0 day, 1 hour, 31 minutes


If anyone can assist me with the flash for this guy i would give many thanks

 

[bobbyforhire]

Tried that, all i get is

%MGMT-5-HTTP_URINOTFOUND:Request for /favicon.ico from client 0.0.0.0 not found


I don't see an HTTP folder, Am i missing something here?

 

[vipergg]

I think you are almost there . Just follow this page , enable the http server .

http://www.cisco.com/en/US/products/hw/switches/ps663/products_tech_note09186a0080094156.shtml

 

[vipergg]

If you have both images in bootflash: . Just add "set ip http server enable" command.