2924 MAC address hunting

[Jpeanut]

What is the "show cam" equivalent on the 2924 IOS? I'm trying to hunt down a specific MAC address and match it to the port. It was much easier on a set-based OS. Thanks for any help.

 

[tcvander]

"show mac-address-table"

switch# show mac-address-table

Dynamic Addresses Count: 45
Secure Addresses (User-defined) Count: 1
Static Addresses (User-defined) Count: 0
System Self Addresses Count: 37
Total MAC addresses: 83
Non-static Address Table:
Destination Address Address Type VLAN Destination Port
------------------- ------------ ---- --------------------
0000.0c07.ac01 Dynamic 1 FastEthernet0/16
0000.0c07.ac01 Dynamic 2 FastEthernet0/16
0000.0c07.ac01 Dynamic 3 FastEthernet0/16
0010.0b3f.ac80 Dynamic 1 FastEthernet0/5
0010.0b3f.ac85 Dynamic 1 FastEthernet0/5
0010.0de1.c9c0 Dynamic 1 FastEthernet0/3
0010.0de1.c9c3 Dynamic 1 FastEthernet0/3
0020.afd0.ea97 Dynamic 1 FastEthernet0/16

See more here:

http://www.cisco.com/univercd/cc/td/doc/product/lan/c2900xl/c2900sa3/sa3cr/macrintr.htm#xtocid128020

Todd VanDerwerken, CCNA, CCDA
Technical Consultant

http://www.ciscolinks.net

 

[bluesman42]

you can also use the sho mac-address address mac-address if you know what the mac address is. This will provide you with only a table showing the particular address you are concerned with.