Using a 2811 Cisco router configured as a VPN server for the purpose of allowing remote access and administration to rack.
Interface FE 0/1 is configured with an internet facing IP address.
Interface FE 0/0 is connected to our LAN.
I need to allow several servers on the Private LAN to access the internet, to do this I attempted to configure NAT on the router, but it won't work and it disables the ability to access the router as a VPN client.
Is there a way to allow both VPN and NAT to use the same internet facing interface without causing a problem?
Interface FE 0/1 is configured with an internet facing IP address.
Interface FE 0/0 is connected to our LAN.
I need to allow several servers on the Private LAN to access the internet, to do this I attempted to configure NAT on the router, but it won't work and it disables the ability to access the router as a VPN client.
Is there a way to allow both VPN and NAT to use the same internet facing interface without causing a problem?
