2801 cannot get to internet

[navsol]

I have a 2801 that I configured with SDM. This is my 1st Cisco router and I have been reading alot, so much I think I have Dain Bramage. Below is my config from the router, can anyone tell me what I am missing. I am trying to get it to the internet, so I can eventually setup up several VPN connections. Thanks in advance.

 

[navsol]

Just restarted the router

 

[JOAMON]

Remember to set your default route bask to the ip address of next hop...

 

[navsol]

It is working with the configuration without the Easy VPN Connection

 

[JOAMON]

What do you want to do with VPN...connect sites together....remote client connection...?

 

[navsol]

We are connecting our office with a main office. I will also be connecting 2 other offices and have remote vpn access for our employees when they travel

 

[JOAMON]

What model router at main office?

 

[navsol]

VPn Concentrator 3000 series

 

[JOAMON]

I have never worked with a VPN concentrator before. I have good experience with router to router VPN and using a router as a VPN server. Is there anyone at corporate that could give you assistance with this?

 

[navsol]

I will have to ask, thanks for all the help

 

[JOAMON]

Wait...just thought of something...you posted:

navsol (IS/IT--Manageme) 31 Mar 05 15:24
Actually now my PC is not getting to the internet also. So as it stands no pcs can get to the internet, but I can ping the network on the other end of the VPN connection.

If you set this up with ezvpn did you also setup the split tunneling for internet access? Split tunneling with route appropriate traffic based on address over vpn and route other traffic out to the internet. Should be an option in your SDM for this.

 

[navsol]

I will have to look at it when I get the vpn backup, it does not seem to want to come back.

 

[JOAMON]

Ill keep watch on this post in case you need anything further....Good Luck